Alpine 68-12118Z86-B Owner's Manual page 49

Antenna Receptacle
Power Antenna Lead (Blue)
Connect this lead to the +B terminal of your power antenna,
if applicable.
• This lead should be used only for controlling the boat's power
antenna. Do not use this lead to turn on an amplifier, or a signal
processor, etc.
Remote Turn-On Lead (Blue/White)
Connect this lead to the remote turn-on lead of your
amplifier or signal processor. When an IMPRINT audio
processor PXA-H100 (sold separately) is connected, use
the Remote Turn-on Lead of PXA-H100 to connect to your
amplifier or signal processor. For details, refer to the
Owner's Manual of PXA-H100.
Illumination Lead (Orange)
This lead may be connected to the boat's lighting system.
This will allow the backlighting of the CDA-9886M to dim
whenever the boat's lights are turned on.
Switched Power Lead (Ignition) (Red)
Connect this lead to an open terminal on the boat's fuse box
or another unused power source which provides (+)12V
only when the ignition is turned on or in the accessory
position.
Battery Lead (Yellow)
Connect this lead to the positive (+) post of the boat's
battery.
Ground Lead (Black)
Connect this lead to a wire connected directly to the boat's
negative battery terminal.
Power Supply Connector
Right Front (+) Speaker Output Lead (Gray)
Right Front (–) Speaker Output Lead (Gray/Black)
Right Rear (–) Speaker Output Lead (Violet/Black)
Right Rear (+) Speaker Output Lead (Violet)
Left Rear (+) Speaker Output Lead (Green)
Left Rear (–) Speaker Output Lead (Green/Black)
Left Front (–) Speaker Output Lead (White/Black)
Left Front (+) Speaker Output Lead (White)
Fuse Holder (10A)
Ai-NET Connector
Connect this to the output or input connector of another
device (CD Changer, IMPRINT audio processor, Equalizer,
HD Radio TUNER MODULE, etc.) equipped with Ai-NET.
• Be sure to set "Setting the Connected Head Unit (MODEL SETUP)"
to "CD CHG", when the DHA-S690 is connected.
• Interface adapter for iPod (KCA-420i) is not recommended for use
with this product.
• You can input TV/video sound by connecting an optional Ai-NET/
RCA Interface cable (KCA-121B) to this component.
Steering Remote Control Interface Connector
To Marine Remote Commander (sold separately).
For details about connections, consult your nearest Alpine
dealer.
Rear Output/Input RCA Connectors
It can be used as Rear Output or Input RCA Connectors.
RED is right and WHITE is left.
Front Output/Input RCA Connectors
It can be used as Front Output or Input RCA Connectors.
RED is right and WHITE is left.
Subwoofer RCA Connectors
RED is right and WHITE is left.
Ai-NET Cable (Included with CD Changer)
RCA Extension Cable (sold separately)
iPod Direct Connector
Control iPod signals.
Connect this to an iPod or to an optional Bluetooth Box.
To use a hands-free mobile phone, an optional Bluetooth
Box connection is required. For details on connection, refer
to the Owner's Manual of the Bluetooth Box. You can also
connect this to an external device (such as a portable
player) by using iPod Direct/RCA Interface cable (sold
separately).
* Refer to "Setting the AUX+ Setup Mode" (page 20).
AUX+ ON : When the external device is connected.
AUX+ OFF : When an iPod is connected.
FULL SPEED™ Connection Cable (KCE-422i)
(supplied)
Marine Remote Commander Connector
This connector is used to connect the Marine Remote
Commander (sold separately).
For details about connections, consult your nearest Alpine
dealer.
System Switch
When connecting a processor or divider using Ai-NET,
place the three switches in the EXT AP position. When no
device is connected, leave the switches in the NORM
position.
• Do not make the three switches to different settings.
• Be sure to turn the power off to the unit before changing the switch
position.
USB Connector
Connect USB cable.
47
-EN