Needle Attachment - Singer 191D-20 Instruction Manual And Parts List

3.7
Needle
Attachment
Caution
Choose a proper
needle size
according to the
count of thread and
the type of sewing
material used.
The power supply
should be cut off
before attaching
the needle.
Turn the hand wheel until the nee-
dle bar reaches the highest point
of its stroke (Figure 12).
Loosen screw '2' and hold needle
'1' with its indented part 'A' facing
exactly to the right in direction 'B'.
Insert the needle in the direction
High Speed Straight Lockstitch Sewing Machine
of the arrow until it will go no fur-
ther.
Tighten the screw '2'.
Make sure the long groove 'C' of
the needle is facing exactly to the
left in direction 'D'.
Figure 12
| Instruction Manual and Parts List
10