Profiles-Set Tones; Offline Profile - Nokia N70 User Manual

Profiles—set tones
To set and customise the ringing tones, message alert
tones, and other tones for different events, environments,
or caller groups, press
the currently selected profile is other than General, the
profile name is shown at the top of the display in the
standby mode.
To change the profile, press
Scroll to the profile you want to activate, and select OK.
To modify a profile, press
Scroll to the profile, and select
Scroll to the setting you want to change, and press
open the choices. Tones stored on the memory card are
indicated with
and listen to each one before you make your selection.
Press any key to stop the sound.
Tip! In the list of tones,
of bookmarks. You can select a bookmark and start
connection to a Web page to download tones.
To create a new profile, select

Offline profile

The Offline profile lets you use the device without
18 Copyright © 2006 Nokia. All rights reserved.
, and select Tools > Profiles. If
in the standby mode.
, and select Tools
Options > Personalise.
. You can scroll through the tone list
Tone downloads opens a list
Options > Create
connecting to the wireless network. When you activate the
Offline profile, the connection to the wireless network is
turned off, as indicated by
indicator area. All wireless phone signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
Warning: In the offline profile you cannot make or
receive any calls, except make calls to certain
emergency numbers, or use other features that require
network coverage. To make calls, you must first activate
the phone function by changing profiles. If the device
has been locked, enter the lock code.
> Profiles.
Warning: Your device must be switched on to use
Offline profile. Do not switch the device on when
to
wireless device use is prohibited or when it may cause
interference or danger.
To leave the
profile. The device re-enables wireless transmissions
(providing there is sufficient signal strength). If a
Bluetooth connection is activated before entering the
Offline profile, it will be deactivated. A Bluetooth
connection is automatically reactivated after leaving the
new.
Offline profile. See 'Bluetooth connection settings', p. 83.
in the signal strength
Offline profile, press , and select another