Basic Troubleshooting - lifeSMART LS-PP1800-6WCH Owner's Manual

Infrared zone heating system
Table of Contents

Advertisement

7. If won't use the unit for a long time, please take batteries out of the remote control according to
following steps, then store remote in a safe place.
PUSH
STORAGE
Store the heater in a cool, dry location when not in use. To prevent dust and dirt build-up, use the original
packaging to repack the unit.

BASIC TROUBLESHOOTING

If the heater will not operate, please check the following before seeking repair advice:
1. Check if the power cord is plugged into an electrical outlet, if not, plug in.
2. Check if power to the main power switch (in the back) is working.
3. Check to see if the battery on the remote is placed correctly, undamaged, and if the insulating film
is pulled out.
NOTE: For the heater to function properly, the desired temperature on the heater must be set a few
degrees higher than the temperature in the room. If it seems to not be heating, increase the desired
temperature on the heater to engage the heat elements.
lid
Battery
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents