Table of Contents
Advertisement
RangeMax NEXT Wireless Access Point WN802T Reference Manual
•
Reset to Factory Defaults: This button can also be used to clear ALL data and restore ALL
settings to the factory default values. These settings are shown in
Settings and Technical
To clear all data and restore the factory default values:
1. Power off the WN802T and power it back on.
2. Use something with a small point, such as a pen, to press the reset button in and hold it in for
at least five seconds—or until the power light changes from blinking green to amber.
3. Release the reset button.
The factory default configuration has now been restored, and the WN802T is ready for use.
5-4
Specifications".
v1.3, August 2006
Appendix A, "Default
Troubleshooting
Advertisement
Table of Contents
