Table of Contents
Advertisement
RangeMax NEXT Wireless Access Point WN802T Reference Manual
Figure 4-4
2. Select the task you want to perform:
•
To create a backup file of the current settings, click Backup under the Save a Copy of
Current Settings heading.
–
If you don't have your browser set up to save downloaded files automatically, locate
where you want to save the file, rename it if you like, and click Backup.
–
If you have your browser set up to save downloaded files automatically, the file will
be automatically saved to the download location
•
To restore settings from a backup file:
–
Click Browse under the Restore Saved Settings from a File heading. Locate and
select the previously saved backup file (by default, netgear.cfg).
–
Click Retrieve. A window will appear with the message that the wireless access point
has been successfully restored to its previous settings. The wireless access point will
restart. This will take about one minute.
Warning: Do not try to go online, turn off the Access Point, shut down the
–
Close the message window.
•
To erase the current settings and reset the wireless access point to the original factory
default settings:
–
Click Restore. The default factory settings will be restored.
4-4
computer or do anything else to the Access Point until it finishes
restarting. When the Test light turns off, wait a few more seconds
before doing anything with the Access Point.
v1.3, August 2006
Management
Advertisement
Table of Contents
