NETGEAR RangeMax NEXT Wireless PCI Adapter WN311B User Manual
You can use either a push button or PIN entry to connect using WPS:
•
Push Button Configuration. Press a push button or push dome on the access point or router,
or click an on-screen button in the software. This is a fairly new technology, so not all access
points and routers provide a push button.
•
PIN entry. Use the wireless PCI adapter's Personal Identification Number (PIN).
Using a WPS Push Button to Connect to a Wireless Access Point or Router
To join a network using a push button:
1. Use the
icon to open the Smart Wizard. On the status bar, click Join a Network. The
adapter detects a network with WPS:
Figure 2-4
2. Select Yes to use WPS, and then click Next.
3. Select Yes (to use a push button), and then click Next.
4. Do either of the following:
–
Press the push button on the access point or router.
–
Log in to the access point or router that you have selected:
–
From the router's main menu, select Add WPS Client.
–
Follow the screens, select Push Button.
–
Click the
5. Within 2 minutes, return to the WN311B Smart Wizard screen, and click
The Smart Wizard initiates your wireless connection.
2-6
icon on the Add WPS Client screen.
v1.0, October 2008
Network Connections and Wireless Security
.