Setup > Mac Address Clone; Setup > Advanced Routing - Cisco WRT54GS - Wireless-G Broadband Router User Manual

Chapter3
DynDNS.org
Setup > DDNS > DynDNS
User Name
Enter the User Name for your DDNS account.
Password
Enter the Password for your DDNS account.
Host Name
The is the DDNS URL assigned by the DDNS
service.
Internet IP Address
The Router's Internet IP address is
displayed here. Because it is dynamic, it will change.
Status The status of the DDNS service connection is
displayed here.
Click the Save Settngs button to apply your changes, or
click the Cancel Changes button to cancel your changes.
TZO.com
Setup > DDNS > TZO
E-mal Address, TZO Key, and Doman Name
settings of the account you set up with TZO.
Internet IP Address The Router's Internet IP address is
displayed here. Because it is dynamic, it will change.
Status
The status of the DDNS service connection is
displayed here.
Click the Save Settngs button to apply your changes, or
click the Cancel Changes button to cancel your changes.
Wreless-G Broadband Router wth SpeedBooster
Setup > MAC Address Clone
A MAC address is a 12-digit code assigned to a unique
piece of hardware for identification. Some ISPs will require
you to register a MAC address in order to access the
Internet. If you do not wish to re-register the MAC address
with your ISP, you may assign the MAC address you have
currently registered with your ISP to the Router with the
MAC Address Clone feature.
MAC Address Clone
Enable/Dsable
Enable.
User Defned Entry
with your ISP here.
Clone Your PC's MAC Address
clone the MAC address of the computer you are using.
Click the Save Settngs button to apply your changes, or
click the Cancel Changes button to cancel your changes.
Setup > Advanced Routing
This screen is used to set up the Router's advanced
functions. Operating Mode allows you to select the
type(s) of advanced functions you use. Dynamic Routing
automatically adjusts how packets travel on your network.
Static Routing sets up a fixed route to another network
destination.
Enter the
Advanced Configuration
Setup > MAC Address Clone
To have the MAC Address cloned, select
Enter the MAC Address registered
Clicking this button will
Setup > Advanced Routing (Gateway)