Fujitsu LifeBook S761 User Manual page 49

T
HE PURPOSE OF SUPERVISOR PASSWORD IS TO BE ABLE TO BYPASS THE USER PASSWORD IN CASE
THE USER PASSWORD IS FORGOTTEN
. Y
SYSTEM
.
WORK
Setting Supervisor Password
You must have set a supervisor password before setting any user passwords. The supervisor password can
bypass the user password. Depending upon your operating system, use the appropriate procedure below.
1
Go to the Start menu.
2
Select All Programs.
3
Select Accessories, then select Run.
4
Type in:
C:\Program Files\Fujitsu\Security Panel Application\Supervisor\FJSECS.EXE, then press [Enter]
5
Follow the on-screen instructions to set the Supervisor password.
Setting User Password
1
Go to the Start menu.
2
Click on Programs (or All Programs).
3
Click on Security Panel Application and Set User Password.
4
Follow the on-screen instructions to set the user password.
Y
OU MAY CHANGE OR REMOVE THE SUPERVISOR OR USER PASSWORD BY REPEATING THE STEPS
DEFINED ABOVE
. T
OU MUST SET BOTH THE SUPERVISOR AND USER PASSWORDS FOR THE SECURITY PANEL TO
.
42 - LIFEBOOK Security/Application Panel
HE SUPERVISOR PASSWORD ALONE WILL NOT LOCK THE