Coolant - Honda EB12D Owner's Manual

Hide thumbs Also See for EB12D:
Table of Contents

Advertisement

Coolant
1.
2.
Open the maintenance
cover (see page 23).
Check the coolant
level in the reserve tank when the engine
is at
normal
operating
temperature.
If the level is near the MIN level, add
coolant
to bring
it up to the MAX level (see page 28 for coolant
recommendation).
.
MAX (UPPER LEVEL)
I
MIN (LOWER LFVELI
-
RESERVE TANK
3. If there is no coolant in the reserve tank, the cooling system should be
checked for leaks and repaired if necessary.
Coolant must then be add-
ed to the radiator and reserve tank.
m
The coolant
is hot and under pressure
and severe
scalding
could
result.
Never
remove
the radiator
cap when
the engine
is hot.
Wait
until
the
engine
is
cool,
then
turn
the
radiator
cap
counterclockwise
until
it stops.
DO NOT PRESS DOWN
WHILE
TURNING THE CAP. After any remaining
pressure has been relieved,
remave
the
cap
by
pressing
down
and
again
turning
it
counterclockwise.
Add enough coolant to fill the radiator, and reinstall
the cap. Be sure to tighten
it securely.
Fill the reserve tank up to the
MAX level with the engine cold. Recheck the reserve tank ante the
engine reaches normal operating
temperature.
27

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents