Gigabyte GA-H67A-USB3-B3 User Manual page 11

Storage Interface Chipset:
Š
- 2 x SATA 6Gb/s connectors (SATA3_0~SATA3_1) supporting up to 2 SATA
6Gb/s devices
- 4 x SATA 3Gb/s connectors (SATA2_2~SATA2_5) supporting up to 4 SATA
3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the
USB Chipset:
Š
- Up to 12 USB 2.0/1.1 ports (4 on the back panel, 8 via the USB brackets
connected to the internal USB headers)
Renesas D720200 chip:
Š
- Up to 2 USB 3.0/2.0 ports on the back panel.
Internal 1 x 24-pin ATX main power connector
Š
Connectors 1 x 8-pin ATX 12V power connector
Š
2 x SATA 6Gb/s connector
Š
4 x SATA 3Gb/s connectors
Š
1 x CPU fan header
Š
2 x system fan headers
Š
1 x power fan header
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
4 x USB 2.0/1.1 headers
Š
1 x serial port header
Š
1 x clearing CMOS jumper
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
Connectors 1 x D-Sub port
Š
1 x DVI-D port
Š
1 x Optical S/PDIF Out connector
Š
1 x HDMI port
Š
4 x USB 2.0/1.1 ports
Š
2 x USB 3.0/2.0 ports
Š
1 x RJ-45 port
Š
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker
Š
Out/Line In/Line Out/Microphone)
I/O Controller iTE IT8728 chip
Š
.
system performance of the RAID set may vary depending on the devices being
connected.
- 11 - Hardware Installation