Advanced Setup - ECS P45T-A2R User Manual

Advanced Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Thermal Management
TM Status
Limit CPUID MaxVal
Enhanced Halt (C1E)
Intel XD Bit
Intel EIST
Quick Power on Self Test
Boot Up Numlock Status
APIC Mode
1st Boot Device
2nd Boot Device
3rd Boot Device
Boot Other Device
: Move Enter : Select
< >
F1: General Help
Thermal Management (Enabled)
This item displays CPU temperature and enables you to set a safe temperature to
Prescott CPU.
TM Status (TM1/TM2)
This item displays CPU Monitor status.
Limit CPUID MaxVal (Disabled)
Use this item to enable or disable the Max CPU ID value limit. When suppports
Prescott and LGA775 CPUs, enables this to prevent the system from "rebooting"
when trying to install Windows NT 4.0.
Enhanced Halt (C1E) (Enabled)
This item enables or disables enhanced halt.
Intel XD Bit (Disabled)
This item enables or disables the Intel XD Bit technology.
Intel EIST (Enabled)
This item allows users to enable or disable the EIST (Enhanced Intel Speedstep
Technology) function. This item shows only if the CPU supports EIST.
Quick Power on Self Test (Enabled)
Enable this item to shorten the power on testing (POST) and have your system start
up faster. You might like to enable this item after you are confident that your system
hardware is operating smoothly.
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
APIC Mode (Enabled)
This item allows you to enable or disable the APCI (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
Advanced Setup
Enabled
TM1/TM2
For the processor its
Disabled
CPUID belows 0F41h.
Enabled
TM2 only can be enbale
Disabled
under below setting.
Enabled
1. Freq.>=3.6GHz FSB800
Enabled
2. Freq.>=2.8GHz FSB533
On
Enabled
Hard Drive
CD/DVD
Removable Dev.
Yes
+/-/: Value F10: Save ESC: Exit
F9: Load Default settings
Using BIOS
29
Help Item