Parts List - Orion SkyQuest XX14i IntelliScope Instruction Manual

Altitude encoder
and board assembly
Azimuth
encoder
disk
Azimuth
encoder
board
Encoder
connecting
board
Hook-and-loop
adhesive strips
Figure 3.
The parts contained in the IntelliScope Object Locator box.

Parts List

Box #1: Optical Tube Assembly and Accessories
(refer to Figure 2)
Qty. Description
1 Lower optical tube section
1 Upper optical tube section
2 Dust covers
1 IntelliScope Object Locator kit (see Box #1A at right
for list of parts)
1 35mm Deep View eyepiece, 2" barrel diameter
1 10mm Sirius Plössl eyepiece, 1.25" barrel diameter
1 9x50 finder scope
1 Finder scope bracket with O-ring
1 Cooling accelerator fan kit
1 Collimation cap
3 Hex keys (2mm, 2.5mm, 4mm)
6 Counterweights, 2.3 lbs. (1.0 kg)
1 XX14i Instruction Manual (not shown)
Controller coil cable
Encoder
connect.
board
washers
Bumper
(x4)
Box #1A: IntelliScope Object Locator Kit
(refer to Figure 3)
Qty. Description
1
1
1
1
1
1
1
1
1
4
2
6
1
1
1
1
1
Manual
IntelliScope Object Locator
Altitude encoder nylon
spacer washers (x2)
IntelliScope Object Locator (hand controller)
Altitude encoder assembly (board and disk)
Azimuth encoder board
Encoder connector board
Azimuth encoder disk
Controller cable (coil cable)
Azimuth encoder cable (shorter)
Altitude encoder cable (longer)
Azimuth encoder spacer washer, thin (1/4" outer
dia., 0.015" thick)
Encoder connector board washers (3/8" outer dia.)
Altitude encoder nylon spacer washers (1/4" outer
dia., white)
Wire clips
9V Battery
Hook-and-loop adhesive strips
Altitude encoder bumper
Altitude retaining knob spacer (3/16" thick, ½" dia.,
white)
Computerized Object Locator Instruction Manual
Azimuth encoder
cable (shorter)
Altitude encoder
cable (longer)
9-Volt
battery
Cable
clips
(x6)
Altitude retaining
knob spacer
Azimuth encoder
spacer washer,
thin
5