Baby Lock Embroidery Professional BMP8 Instruction And Reference Manual page 101

OTHER BASIC PROCEDURES
3 Touch .
1 Touch to continue embroidering.
2 Touch to cancel embroidering and display the
pattern type selection screen to select a new
pattern.
The embroidering screen displayed before
the machine was turned off appears.
4 Touch .
The stitch navigating screen appears.
84
—————————————————————————————————————————————
5 Touch two or three times to go back
two or three stitches.
1 Each touch of this key moves one stitch back
through the stitching.
• Check that the needle drop point is
positioned where stitches have already been
sewn.
Touch .
6
The embroidering screen appears again.
7 Touch , and then press the start/stop
button to continue embroidering.
Memo
● The machine can be stopped at any time,
even while it is embroidering; however, if
the machine is stopped when the thread
color is changed, it is not necessary to go
back through the stitching when
embroidering is continued. The machine
can also be set to stop when the thread
color is changed. (For details, refer to
"Setting the Machine to Stop at Color
Changes" on page 92.)