Call Features; Volume Control; Hold Call; Speed Dialing - Kyocera TNT S2400 User Manual

3 C F
ALL EATURES
This chapter describes call features such as volume,
holding calls, speed dialing, and other features.

Volume control

You have several ways to control the volume of
your phone.
Adjust volume during a call
To adjust the earpiece volume during a call, press
the key up or down.
Volume
Use the speakerphone
Your phone has a built-in speakerphone. To turn
on the speakerphone, press the
key. The speakerphone icon appears on the main
screen when the speakerphone is on. To turn off
the speakerphone, press the
key again.
Note: If you press the
an incoming call, you will answer the call.
Silence an incoming call
To silence the phone without answering the
call press the
Volume
voicemail. To silence the phone and answer the call,
press the key and then press the
Volume

Hold call

Use this feature to place incoming calls on hold
until you are ready to answer them. See "Hold
call" on page 40.
User Guide
Speakerphone
Speakerphone
key during
Speakerphone
key. The call will go to
Send

Speed dialing

Use the Speed Dial feature to assign a one- or
two-digit shortcut to a contact. Before you can use
speed dialing, you must save a phone number as a
contact and assign a speed dial location to it. See
"Contact number" on page 23.
To call a contact that has a speed dial location.
1. Enter the one- or two-digit speed
dial location.
2. Press the

1-Touch dialing

This feature is the fastest way to speed dial a
contact that has a speed dial location.
See "1-Touch dialing" on page 41.

Voicemail

Configure your voicemail
Before your phone can receive voicemail
messages, you must set up a password and record
a personal greeting with your service provider.
When you have set up your voicemail, all
unanswered calls to your phone are automatically
key.
transferred to voicemail, even if your phone is in
use or turned off.
1. Press and hold the
2. Follow the system prompts to create a
password and record a greeting.
key.
Send
key.
1
11