Call Features; Power Phone Up; Make Phone Calls; Answer Phone Calls - Kyocera Rally User Manual

2

Call Features

This section describes the basic features
related to calls.

Power Phone Up

● To turn your phone on, press and hold
and wait until the phone display
lights up.
● To turn your phone off, press and hold
for two seconds until you see the
powering-down animation on the display
screen.

Make Phone Calls

Make sure you are in an area where a
signal can be received. Look for the signal
strength icon on the home screen. The
more bars, the stronger the signal. If only
one bar is shown, move to where the
signal strength is better.
When the phone has been idle for a time,
it changes to power save mode. Press any
key to return to normal operating mode.
There are several ways you can make a
phone call.
Call Using a Number
1. Enter a phone number.
2. Press .
Call Features
Call Using a Contact
1. From the home screen, select
CONTACTS.
2. Highlight a contact and press
Call Using Voice Recognition
You can use voice recognition to call a
contact from your contacts list or to dial a
phone number. For more information, see
"Voice Recognition" on page 55.
Redial a Number
1. Press to open your history.
2. Highlight a phone number or contact
and press .
Note: To redial the last number called,
received, or missed, press

Answer Phone Calls

When a call comes in, the phone rings,
vibrates, or lights up. The phone number
of the caller also appears if it is not
restricted. If the number is stored in your
contacts list, the contact's name appears.
There are two ways to answer a phone
call.
Answer Using Earpiece
● Press
.
Answer Using Speakerphone
● Press
.
.
.
twice.
11