Table of Contents
Advertisement
The screen is close and
power LED is on.
The remote control is not
working.
Don't display the subtitle
When the machine tries to
find and store channels you
get
the
message
signal"
When only very few of the
expected
number
channels are found.
During the channel
searching process, the
buttons or remote
controller's keys are
insensitive.
Can't play the music file
correctly
Can't play the video.
Battery exhausted.
Battery exhausted.
Remote
control
incorrectly aimed
The program signal no
subtitle date
The subtitle don't open or
signal too weak
The aerial is not properly
connected to the machine.
The aerial is not correctly
directed towards the trans-
"No
mitter.
The aerial is not suitable
for digital channels.
of
The signal is too weak for
the connected aerial.
There are no terrestrial
digital transmissions in the
area.
Since the channel searching
process use a lot of system
resource, the system scan
keys
or
buttons
become very slow.
The file is damaged or code
is wrong
The format of the video
doesn't compatible or file
has damaged.
there are some condensed
fluids in it.
Change battery.
Change battery.
Aim the remote control at
is
box.
Check that nothing blocks
the front panel.
Try press the S.TIT button
open the subtitle.
Make sure the signal is
good
Check
tallation
connections.
Check that the aerial is
directed towards the trans-
miters.
Check that digital trans-
missions are available in
the area.
If things does not work out
as they should, let the local
TV dealer check whether
the aerial is intended for
receiving
missions or not. If not you
have to exchange the aerial.
Try press buttons or remote
controller's keys several
will
times.
Change the right files.
The max bit-rate of the
video is 8Mbps.
23
the
aerial
ins-
including
its
digital
trans-
Advertisement
Table of Contents
