Operation; Basic Operation - AWA MHDV3209-F4 User Manual

BASIC OPERATION

TURN ON THE UINT
Press the POWER button on the remote control to switch on the power. The power indicator will light up in
green colour, press the POWER button again to switch off the power, and the indicator will change to red.
CHANNEL SEARCH
Press the SOURCE button on the remote control to select the TV or DTV input mode, and press the OK button
to confirm.If you are using the unit for the first time, an Installation Guide menu will be displayed to guide you
through the channel scan,Use the remote control to finish channel scan (you can also refer to CHANNEL MENU
(page 11) in this manual for the channel scan operation).
WATCH TV PROGRAM
Press the CH- or CH+ button to select the previous or next channels or press the 0-9 buttons to enter a channel
number directly.Press CH.LIST button to view the channels list and press the
TV programmes.
CHANGE VOLUME
Press the VOL - or VOL + button to adjust the volume level. Press the VOL - button repeatedly to decrease the
volume; press the VOL + button repeatedly to increase the volume from 0 to 100.
CHANGE PICTURE MODE
Press the button repeatedly to cycle through the available video picture modes.
PIC
CHANGE SOUND MODE
Press the button repeatedly to cycle through the available sound modes.
SOUND
VIEW CHANNEL INFORMATION
Press the INFO button to display the preset channel information.
MUTE
Press the button to cut off the sound output, press this button again to resume sound output.
MUTE
CHANGE INPUT SOURCE
Press the button then press the
SOURCE
confirm.
NEW INSTALLATION
Menu Language English
Auto Tuning
EXIT MENU OK
buttons to select the input source and press the OK button to
-9-

OPERATION

buttons to select the desired