Blue Screen - Sharp 32SC26B Operation Manual

[]
BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not
received. After 15 minutes of non-reception, the TV will turn off
automatically,
1 Press MENU to access the MAIN MENU screen,
2 Press OH A/'V to move the "0" mark to "SET UP",
MENU
(_ (D @ - VOLUME
_®Q (+)/(-)
O®Q
r CHANNEL
up (A)/
DOWN(V)
_ENU
MENU
MENU
_LEEP TIllER
t_VlDEO ADJUST
_AUDIO SELECT
EE_DIGI TAL AUDIO
i_CLOSED CAPTION
_PARENT 03NTROL
[_EN6RGY_AVE
_SET UP
(MAIN MENU screen)
3
Press VOL +/- to access the SET UP screen.
_ET UP
OBLUE SCREEN
LAfTGUAGE
CH SETTft_G
AUTO It_PUT
SCREEN FORe'AT
(SET UP screen)
4 Press VOL +/- to access the BLUE SCREEN select screen,
BLUE SCREEN:OEF
BLUE SCREENselect screen
5 Press VOL +/- to select"ON",
BLUE SCfIEEN:ON
MENU
6 Press MENU to exiL @
When the BLUE SCREEN is set to "ON"
No signal Blue screen
after 15
minutes
Power turns off
automatically
J
Standby mode
- Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function
despite the presence of a broadcast signal.. To continue watching TV under these conditions, switch
the BLUE SCREEN "OFF".
o While INPUT 1, 2, or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if
BLUE SCREEN is turned on.
36