Sharp 32SC26B Operation Manual page 2

Welcome to the SHARP Family We are pleased that you are now the owner of a SHARP Cotor Televisior
- built for outstanding quality, reliabilty and performance.
Every SHARP Color Television set is tuned and adjusted for proper color and sound, and has passec
through the most stringent quality control tests at the factory. We have prepared this OPERATION MANUAl.
so that you may adjust the picture and color to your personal viewing preference
We sincerely hope that you receive the greatest satisfaction and enjoyment from your new SHARP Colo_
Television set for years to come
Please read these instructions carefuly, and keep them handy for your future reference
IMPORTANT
To aid reporting in case of loss or theft, please record the TV's
model and serial numbers in the space providedThe numbers
are located at the rear of the TV
Model No.:
Serial No.:
There are two important reasons for prompt warranty registration of your new SHARP television set. Use
the REGISTRATION CARD packed in with the set.
FIRST - WARRANTY
This is to assure that you will immediately receive the full consumer benefit of the parts, service and tabor
warranty applicable to your purchase..
SECOND - CONSUMER PRODUCT SAFETY ACT
To assure that you will promptly receive any safety notification on inspection, modification or recall
that SHARP may be required to give under the 1972 Consumer Product Safety Act. PLEASE READ
CAREFULLY THE IMPORTANT "LIMITED WARRANTY" CLAUSE ON THE LAST PAGE.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO WET LOCATIONS.
CAUTION
]
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL
The lightning flash with
arrowhead within a triangle
is intended to tell the user
that parts inside the producl
are a risk of electric shock tc
persons.
The exclamation point within a
triangle is intended to tell the
user that important operating
and servicing instructions
are in the papers with the
appliance.
"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention
to Article 820-40 of the National Electrical Code that provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be connected to the grounding system of the building,
as close to the point of cable entry as practical."
WARNING - FCC Regulations state that any unauthorized changes or modifications to this equipment
not expressly approved by the manufacturer could void the user's authority to operate this
PRODUCT DISPOSAL
This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.
Disposal of these materials may be regulated due to environment considerations. For disposal or
recycling information, please contact your local authorities or the Electronics Industries Alliance:
www.eiae.org