Program Home And Local Area Codes - AT&T Four-Line Intercom Speakerphone 974 User Manual

974_CIB_1ATT_033104
n n n
n n
i i i
i i
38
3/31/2004 5:28 PM Page 38
Program Home and Local
Area Codes
You can program this phone to recognize one Home and
up to five Local Area Codes. See "Home Area Code" and
"Local Area Codes" on page 6 for definitions.
Press E to begin feature setup.
1
Press - until the screen display includes
2
SPECIAL OPTIONS.
3 Press E. The screen display includes LINE
USAGE.
Press - until the screen display includes AREA
4
CODES.
5 Press E. The screen display includes HOME
AC and the current setting.
6 Use the dial pad keys to enter your Home Area
Code, then press -. The screen display includes
LOCAL AC1 and the current setting.
If you need to enter any Local Area Codes, use
the dial pad keys and then press - to scroll to
the next screen (LOCAL AC2, LOCAL AC3,
LOCAL AC4, and LOCAL AC5).
¥
NOTE: If you must dial the area code to place
calls within your own area code, enter "000" for the
Home Area Code and enter your area code as a
Local Area Code.
7 When you are finished entering all of the area
codes you need to program, press - until the
screen display includes DONE.
Press E. The screen display includes AREA
8
CODES.
Press - until the screen display includes LINE
9
GROUP, then proceed to Step 5 on page 39 to
assign the line group
— OR —
Press and hold E to return to the idle
screen.
¥
NOTE: You can exit feature setup and return to the
idle screen any time. Simply press and hold E.