Data Refreshes; Refreshing Data Manually; The Mib - AT&T OneVision DEFINITY G3 Fault Management Installation And Integration Manual

Integration for at&t onevision

Hide thumbs Also See for OneVision DEFINITY G3 Fault Management:

Table of Contents

Alarm States

Data Refreshes

You can verify that the Proxy Agent is connected to the PBX while Fault

Management is running by refreshing the PBX data.

Fault Management can refresh PBX data only if the Proxy Agent is

connected to the PBX. Therefore, if a refresh fails, the Proxy Agent may

have lost contact with the PBX.

Use the following steps to refresh data manually:

1. Access the Switch View screen.

2. Select one of the following options from the menu bar:

Fault, then select Refresh Alarms and Errors

Configuration, then select Refresh Configuration Data

If . . .

The refresh succeeds

A pop-up window displays a message stating

that the refresh has failed

You can verify that the Proxy Agent is connected to the PBX by viewing the

status of the g3connectState field in your MIB.

To access the g3connectState field, follow these steps:

1. Starting on your configuration map, select the DEFINITY icon for the PBX

that you want to check.

2. Select Monitor from the menu bar, then select DEFINITY.

5-10

Issue 1 October 1995

Then the

connection is . . .

Down

Table of Contents