Standard Cmos Features - Gigabyte GA-G31M-S2L User Manual

Lga775 socket motherboard for intel core processor family/intel pentium processor family/intel celeron processor family
Hide thumbs Also See for GA-G31M-S2L:
Table of Contents

Advertisement

2-3

Standard CMOS Features

Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 2 Master
IDE Channel 2 Slave
IDE Channel 3 Master
IDE Channel 3 Slave
Drive A
Floppy 3 Mode Support
Halt On
Base Memory
Extended Memory
Total Memory
: Move
Enter: Select
F5: Previous Values
Date
Sets the system date. The date format is week (read-only), month, date and year. Select the
desired field and use the up arrow or down arrow key to set the date.
Time
Sets the system time. For example, 1 p.m. is 13:0:0. Select the desired field and use the up arrow
or down arrow key to set the time.
IDE Channel 0 Master/Slave
IDE HDD Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
IDE Channel 0 Master/Slave
Configure your IDE/SATA devices by using one of the three methods below:
• Auto
• None
• Manual
Access Mode
IDE Channel 2, 3 Master/Slave
IDE Auto-Detection
Press <Enter> to autodetect the parameters of the IDE/SATA device on this channel.
Extended IDE Drive
Configure your IDE/SATA devices by using one of the two methods below:
• Auto
• None
Access Mode
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
Standard CMOS Features
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
If no IDE/SATA devices are used, set this item to None so the system will
skip the detection of the device during the POST for faster system startup.
Allows you to manually enter the specifications of the hard drive when the
hard drive access mode is set to CHS.
Sets the hard drive access mode. Options are: Auto (default), CHS, LBA, Large.
Lets BIOS automatically detect IDE/SATA devices during the POST. (Default)
If no IDE/SATA devices are used, set this item to None so the system will
skip the detection of the device during the POST for faster system startup.
Sets the hard drive access mode. Options are: Auto (default), Large.
Wed, Aug 22 2007
10:31:24
[None]
[None]
[None]
[None]
[None]
[None]
[1.44M, 3.5"]
[Disabled]
[All, But Keyboard]
640K
510M
512M
F10: Save
- 35 -
Item Help
Menu Level
ESC: Exit
F1: General Help
F7: Optimized Defaults
BIOS Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents