AT&T MERLIN Plus System Manual page 160

HOW TO USE
Music-on-Hold (and Background Music)
DESCRIPTION
5-96 Section 5: Reference
Dial one of the following codes to set the volume you prefer:
2
– Dial *16 to turn off the background music.
– Dial *17 to set the volume to low.
– Dial *18 t set the volume to medium.
O
– Dial *19 to set the volume to high.
Touch Administer.
3
The console beeps twice.
Leave administration mode by sliding the T/P switch to the center
4
position.
You can use a programmed button or a dial code to access the Loudspeaker
Page feature.
To use a Loudspeaker Page button:
Touch Loudspeaker Page.
1
When you hear a beep, lift your handset and make your announcement.
2
To use this feature by dialing a code:
Touch Intercom.
1
2 Lift your handset.
Dial 6.
3
When you hear a beep, make your announcement.
When you hang up, the loudspeaker turns off automatically.
When you have Music-on-Hold, you can provide background music for Callers
whom you have placed on hold. You can also provide background music
throughout the building using the loudspeaker paging system.
The Music-on-Hold (MOH) Jack is a Phonograph Jack, into which you can
plug a radio, tape player, or stereo system. It is on the front of the control
unit, under the red Warning and the green Power lights.