Operating Elements And Connections; Front Panel; Rear Panel - Behringer U-CONTROL UCA202 User Manual

8
U-CONTROL UCA202 User Manual
3. Operating Elements
and Connections

3.1 Front panel

(1)
LED
(2)
Fig. 3.1: Front panel UCA202
The LED indicates the status of the USB
(1)
power supply.
(2) DIGITAL OUTPUT: The Toslink jack carries an S/PDIF
signal which can be connected via a fiber optic cable,
for example, to the digital input of an effects device.
(3) Use the jack to connect a standard pair of headphones
equipped with a �" TRS connector.
(3) (4)
(4) The VOLUME control adjusts the volume level of the
headphones output. Turn the control fully to the left
before you connect the headphones. This helps you avoid
the damage that is caused by high volume settings.

3.2 Rear panel

(5)
Fig. 3.2: Back of the UCA202
(5) Use the LINE-OUT jacks for audio cables with
RCA connectors.
(6) Use the LINE-IN jacks for audio cables with
RCA connectors.
(7) The OFF/ON-MONITOR switch activates the monitor
function. In this case the input signal is routed directly
to the headphones output.
(6) (7)