Connecting To Your Network; Connecting To A Power Source; Turning On Your Drobo Device - Drobo B800FS Getting Started Manual

Connecting to Your Network

Your Drobo FS/B800fs connects to a network using an Ethernet port.
1. Plug one end of the Ethernet cable into the back of your Drobo FS/B800fs.
2. Plug the other end into your router or switch.

Connecting to a Power Source

1. Connect the power supply to the power connection at the back of your Drobo
device.
2. Connect the other end of the power supply to a power source.
Note: We recommend plugging into an uninterruptible power supply (UPS) or
surge protector. For more information, see "Using an Uninterruptible Power
Supply (UPS) or Power Surge Protector" on page 6.

Turning On Your Drobo Device

1. Press the power toggle button on the back of your Drobo device once.
The following results:
drobo.com | Getting Started Guide for Your Drobo FS/B800fs | 13