Configuring Iscsi Settings - Drobo B800i Getting Started Manual

Configuring iSCSI Settings
1. Once the connection between your Drobo B800i and host computer has been
established via your USB connection, your Drobo B800i appears in Drobo Dashboard
on the All Devices page as follows.
2. To manually assign IP addresses and modify other iSCSI settings, first click the
Settings option on the Navigation menu, and click Network.
The Network (iSCSI) Settings page appears.
3. In the iSCSI 1 area, change the settings for the first iSCSI port as needed.
drobo.com | Getting Started Guide for Your Drobo B800i | 19