Maintenance Minder Indicator; Message Indicator; Vtm-4 Indicator - Honda 2012 Pilot Owner's Manual

Maintenance Minder
Indicator
Except Touring models
This indicator comes on for a few
seconds when you turn the ignition
switch to the ON (II) position. It
reminds you that it is time to take
your vehicle in for scheduled
maintenance. The maintenance main
items and sub items will be displayed
in the information display. See page
559 for more information on the
TM
Maintenance Minder .
This indicator goes off when your
dealer resets it after completing the
required maintenance service.

Message Indicator

On Touring models
This indicator comes on when there
is a system message on the multi-
information display. Press the INFO
button on the steering wheel (see
page 85 ) to see the message (see
page 92 ).
Most of the time, this indicator
comes on along with other indicators
in the instrument panel such as the
seat belt reminder indicator, SRS
indicator, VSA system indicator, etc.
Instrument Panel Indicators

VTM-4 Indicator

4WD models only
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If it comes on at any other
time, there is a problem in the 4WD
system. Take the vehicle to your
dealer to have it checked.
If the indicator blinks while driving,
the VTM-4 fluid temperature is too
high. Pull to the side of the road
when it is safe, shift to Park, and let
the engine idle until the indicator
goes out.
Continuing to drive with the VTM-4
indicator blinking may cause serious
damage to the system.
75