Replacing A Front Fog Light Bulb - Honda 2012 Pilot Owner's Manual

Lights
SIDE MARKER LIGHT
SOCKET
3. Pull the bulb straight out of its
socket.
4. Push the new bulb straight into
the socket until it bottoms.
5. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
6. Turn on the lights to make sure
the new bulb is working.
588

Replacing a Front Fog Light Bulb

BULB
Except LX models
Your vehicle uses halogen light
bulbs. When replacing a bulb, handle
it by its plastic case, and protect the
glass from contact with your skin or
hard objects. If you touch the glass,
clean it with denatured alcohol and a
clean cloth.
Halogen bulbs get very hot when lit. Oil,
perspiration, or a scratch on the glass
can cause the bulb to overheat and
shatter.
UNDER COVER
HOLDING CLIP
1. Remove the five holding clips with
a flat-tip screwdriver.
2. Pull down the under cover from
the bumper carefully.