Removing The Wintv Driver With Hcwclear - Hauppauge WinTV Installation And Reference Manual

WinTV
Installation and Reference Manual
After rebooting Windows, an automatic installation of the new
WinTV driver takes place. You will see the New hardware
Found message, followed by the WinTV Inspection program
and the WinTV Direct Draw Check program.
After installing a new WinTV driver, it is advisable to install the latest
WinTV applications, including the WinTV32, the WinTV-radio and
IR remote control applications (if your WinTV board has these
features).

Removing the WinTV driver with HCWCLEAR

On occasion, it might be necessary to remove all traces of the
WinTV driver on your PC's hard disk. To do this, there is a program
on the WinTV Installation CD-ROM called HCWCLEAR.
Before running HCWCLEAR, you must manually stop the WINTV IR
Remote Control application. This can be done by double clicking
on the IR icon in the Windows toolbar, and clicking on Stop.
The HCWCLEAR application can be found in the MISC/UTILITY
directory:
Once you have stopped the IR application, run HCWCLEAR by dou-
ble clicking on its icon:
8-3