Using The Wintv-Radio Buttons; Programming The Presets - Hauppauge WinTV Installation And Reference Manual

WinTV
Installation and Reference Manual

Using the WinTV-radio Buttons

Volume:
in the Volume Control applet.
Tune:
Seek:
Mem:
station to a preset, click on Mem and then on one of the Preset but-
tons (1-10).
Mute:
Mono:
Scan:
the RIGHT mouse button anywhere on the WinTV-radio window to
set the Scan mode.
Min:
CD:
Audio-CD´s.
TV:
cation.
OFF:
1 - 10:

Programming the Presets

To assign a radio station to a special Preset button do the following:
1. Tune in the desired station with the Seek button (or by using Tune).
2. Click on the Mem button. It will change to red.
3. Click on one of the Preset buttons (1-10).
Using the right Mouse button
When you click the RIGHT mouse button in the WinTV-radio window,
this menu comes up:
5-2
The audio volume is adjusted by setting the LineIn level
Fine tune the current radio channel.
Search for the next active FM radio channel.
Sets a FM radio channel preset. To assign the current
Turn off the sound.
Force mono reception.
Searches for new stations until you click on Stop. Click
Minimizes the WinTV-radio window.
Starts the Audio CD-Player for playing back
Closes the radio application and starts the WinTV appli-
Closes the radio application.
Preset 1 - 10