Gigabyte GA-Z68XP-UD3R User Manual page 97

When completed, the RAID tab will display the new array. (Figure 8)
Marvell BIOS Setup (c) 2009 Marvell Technology Group Ltd.
[ Selection]
[ Adapter]
[Virtual Disks]
ID Name
0 GBT
[Physical Disks]
Port Disk Name
S0 SATA: WDC WD800JD-22LSA0
S1 SATA: WDC WD800JD-22LSA0
ENTER/SPACE: Select, ESC: Back/Exit
To exit the RAID BIOS utility, press <Esc> on the main screen and press <Y> to confirm.
Now, you can proceed to install the operating system.
Delete the RAID Array:
To deleted the existing array, press <Enter> on the RAID tab and select Delete VD. When the Delete VD menu
appears, press <Enter> on the array to select it and then press <Enter> on NEXT. When prompted, press <Y>
to confirm (Figure 9). When the message "Do you want to delete the VD's MBR?" appears, press <Y> to
clear the MBR or press other keys to ignore.
Marvell BIOS Setup (C) 2009 Marvell Technology Group Ltd.
[ Selection] [ Adapter]
Delete VD
ID Name
* 0 GBT
NEXT
Delete the VD?[Y]
[ Devices]
Size Level Status
152.4GB RAID0 ONLINE
Size
76.3GB
76.3GB
Figure 8
[ Devices]
Size Level
152.4GB RAID0
Figure 9
- 97 -
[ RAID ]
Stripe CacheMode
64KB WriteBack
Max Speed Status
SATA 3Gb/s ASSIGNED
SATA 3Gb/s ASSIGNED
[ RAID ]
RAID Config
Status Stripe CacheMode
ONLINE 64KB WriteBack
Appendix