Gigabyte GA-Z68XP-UD3R User Manual page 11

Storage Interface 1 x Marvell 88SE9172 chip:
Š
- 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2
SATA 6Gb/s devices
- Support for RAID 0 and RAID 1
USB Chipset:
Š
- Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available
through the internal USB headers)
2 x Etron EJ168 chips:
Š
- Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through
the internal USB headers)
IEEE 1394 VIA VT6308 chip:
Š
- Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through
the internal IEEE 1394a header)
Internal 1 x 24-pin ATX main power connector
Š
Connectors 1 x 8-pin ATX 12V power connector
Š
4 x SATA 6Gb/s connectors
Š
4 x SATA 3Gb/s connectors
Š
1 x CPU fan header
Š
2 x system fan headers
Š
1 x power fan header
Š
1 x front panel header
Š
1 x front panel audio header
Š
1 x S/PDIF Out header
Š
3 x USB 2.0/1.1 headers
Š
1 x USB 3.0/2.0 header
Š
1 x IEEE 1394a header
Š
1 x serial port header
Š
1 x clearing CMOS jumper
Š
1 x Trusted Platform Module (TPM) header
Š
Back Panel 1 x PS/2 keyboard/mouse port
Š
Connectors 1 x optical S/PDIF Out connector
Š
1 x IEEE 1394 port
Š
1 x HDMI port
Š
8 x USB 2.0/1.1 ports
Š
2 x USB 3.0/2.0 ports
Š
1 x RJ-45 port
Š
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker
Š
Out/Line In/Line Out/Microphone)
I/O Controller iTE IT8728 chip
Š
- 11 - Hardware Installation