Galaxy DX 2527 Owner's Manual page 10

transmitter frequency either above or below the receive
frequency by a user programmable amount. In the following
example, programming of a 100 KHz offset will be described.
Before attempting to program the offset frequency, ensure that
the radio is operating in the manual mode by pressing the
MAN button.
1. Press the PRG (Program) button.
2. Press the SPLIT button. The LCD display window will
display "00000" with "PRG" and "SPLIT" being
displayed in the lower left-hand corner.
3. Using the SHF button and the UP and DOWN arrows as
described earlier, program the display to read "01000".
4. Press ENT. A 100 KHz offset has now been programmed
into the radio.
5. Return the radio to manual operation by pressing the MAN
button.
6. Using the SHF button and the UP and DOWN arrows as
described previously, set the radio for the desired receive
frequency.
7.
Press SPLIT. In the lower right corner of the display,
either "SPLIT+" or "SPLIT-" will be displayed. If
"SPLIT+" is displayed, the transmitter will be offset 100
KHz above the receive frequency when keyed. If "SPLIT-
" is displayed, the transmitter will be offset 100 KHz
below the receive frequency.
NOTE: When the transmitter is keyed, the frequency display will change
to show the frequency being transmitted.
WARRANTY
This radio is covered by a two year
limited parts and labor warranty.
- 18 -
•
"Limited" means that we will repair problems caused by factory defects or normal use
at no charge.
•
Before returning a radio to us for warranty service, please call our Service Department
for a Repair Authorization Number (RAN). This RAN must be written below your
return address on the outside of the shipping box. Boxes, which arrive without a RAN,
will be refused, and the shipping company will return the unopened box to you. Be sure
to have a pen and paper ready along with the serial number of your radio before calling.
We will give you the RAN and our shipping address over the phone. The telephone
number of the Service Department is (760) 480-8800, and we suggest calling between
10:00 AM and 4:00 PM Pacific Time.
•
Please include a note with a detailed description of the symptoms. This is important
because it will help the technician who works on your radio to locate your problem.
Intermittent problems are easily overlooked, so be sure to give as much detail as
possible in your note. Also, please include your telephone number in case our
technicians have any additional questions.
•
Do not send your power cord or microphone unless we ask for these items during our
telephone conversation.
•
You are responsible for getting the radio safely to us. (We suggest using United Parcel
Service.) You must pay to ship the radio to us, and we will pay to ship the radio back to
you. Since we use UPS and they do not ship to Post Offices boxes, please provide us
with a street address for the return of your radio.
•
We will repair and return your radio as soon as we can. We appreciate your choosing a
Galaxy radio and we want you to be on the air as much as possible!
Be sure to visit our web site at
www.GalaxyRadios.com
PRINTED IN TAIWAN
ATTURO010J
- 19 -