Fujitsu ASYB09LDC Operating Manual page 19

OPERATING TIPS
Temperature and Humidity Range
Outdoor temperature
Indoor temperature
G If the air conditioner is used under higher temperature conditioner than those listed, the built-in protection circuit may
operate to prevent internal circuit damage. Also, during Cooling and Dry modes, if the unit is used under conditions of
lower temperature than those listed above, the heat-exchanger may freeze, leading to water leakage and other damage.
G Do not use this unit for any purposes other than the Cooling, Dehumidifying, and air-circulation of rooms in ordinary
dwellings.
G If the unit is used for long periods under high-humidity conditions, condensation may form on the surface of the indoor
unit, and drip onto the floor or other objects underneath. (About 80% or more)
G Acoustic Noise Information
The maximum sound pressure level is less than 70 dB (A) for both indoor unit and outdoor unit. According to IEC 704-1 and
ISO 3744.
Tips for saving energy
G When the outdoor temperature is low (about 10 °C or less), the unit will consume the power of 20~40W unless the power
plug is disconnected from the outlet even if the air conditioner turns off.
G Remove the power plug to stop the power supply for energy saving when not using for a long time.
Cooling Mode
About –10 to 43 °C
About 18 to 32 °C
Dry Mode
About –10 to 43 °C About –15 to 24 °C
About 18 to 32 °C About 30 °C or less
Heating Mode
En-18