Power Management; Power/Suspend/Resume Button; Standby (Sleep) Mode - Fujitsu LifeBook V700 User Manual

Power Management

Your Fujitsu LifeBook notebook has many options and features for conserving battery power. Some of
these features are automatic and need no user intervention, such as those for the internal modem. However,
others depend on the parameters you set to best suit your operating conditions, such as those for the
display brightness. Internal power management for your notebook may be controlled from settings made
in your operating system, pre-bundled power management application, or from settings made in BIOS
setup utility.
Besides the options available for conserving battery power, there are also some things that you can do to
prevent your battery from running down as quickly. For example, you can create an appropriate power
saving profile, put your notebook into Standby (Sleep) mode when it is not performing an operation, and
you can limit the use of high power devices. As with all mobile, battery powered computers, there is a
trade-off between performance and power savings.

Power/Suspend/Resume Button

When your notebook is active, the Power/Suspend/Resume button can be used to manually put the
notebook into Standby (Sleep) mode. Push the Power/Suspend/Resume button when the notebook is
active, but not actively accessing anything, and immediately release the button.
If your notebook is suspended, pushing the Power/Suspend/Resume button returns your notebook to
active operation. You can tell whether the system is Suspended by looking at the Power indicator. If the
indicator is visible and not flashing, your notebook is fully operational. If the indicator is visible and
flashing, your notebook is in Standby mode. If the indicator is not visible, the power is off or your
notebook is in Hibernation mode. (See Hibernation Feature)

Standby (Sleep) Mode

Standby (Sleep) mode in Windows saves the contents of your system memory during periods of inactivity
by maintaining power to critical parts. This mode turns off the CPU, display, hard drive, and all other
internal components except those necessary to maintain system memory and for restarting.
Your notebook can be put in Standby mode by:
46 - Power Management