Precautions - ESI Waveterminal 2496 Manual

4. Microsoft Windows 98SE/ME/2000/XP Operating System
5. UDMA 66/100 7200 rpm hard disk drive
A B O U T T H E M I D I
The MIDI Terminal 2120 is a 2 In, 2 Out MIDI Interface from ESI. The MIDI
Terminal 2120 is ONLY designed to be used with the ESI Waveterminal 2496.
You can use it easily with a simple installation. The MIDI Terminal 2120 is an easy
installation device and does not require any power supply, IRQ setting, or driver to
install.
The MIDITerminal 2120 driver is already included in the driver of the WT2496.
Therefore, by the installation of the driver for the Waveterminal 2496, you can use
the MIDI Terminal 2120 right away. The MIDI Terminal 2120 can be used under
Windows 98SE/ME/2000 with the Waveterminal 2496. Particularly, it will work
under Windows 2000 to provide the most stable MIDI work Environment.
The components in your PC and on the WT2496 board
are sensitive to electrostatic discharge. Follow these
precautions to avoid damage caused by static electricity.
1.
Leave the WT2496 board in its anti-static wrapping until you are
properly grounded.
2.
Turn off your computer's main power switch, and unplug the power
cord.
3.
Remove the cover to expose the internal parts of your computer. You
should follow your computer's manual on how you can do this safely.
4.
To be grounded, touch the PC's metal chassis with both hands.
5.
Only handle the WT2496 by its edges and metal bracket. Do not touch
the components of the board even after you have been grounded.
To avoid further static electricity hazards, you should
avoid wearing static clothing and follow the above
procedures every time you have to install or de-install the
WT2496 board.
T E R M I N A L 2 1 2 0 ( O P T I O N A L )
Warning!
P R E C A U T I O N S
6