Logic - ESI Waveterminal 2496 Manual

LOGIC

1. Select 44.1 from the "Control Desk" panel.
2. Start Logic.
3. Go to "Audio"->"Audio Hardware & drivers."
4. Select the "Audio Driver 2" tab.
5. Check the "ASIO" box and select the ASIO 2.0 Waveterminal 2496 Driver from
"Driver."
6. Check the "Software monitoring" box.
7. Close the Audio Window.
8. Go to "Options"->'Settings"->"Synchronization Settings."
9. Select the "MIDI" tab.
10. Select a port from "Transmit MIDI Clock."
To avoid "Audio, Midi sync error..." or "CPU overload error...", please do not check "All
ports" from "Transmit MIDI Clock."
11. Please make inactive any software synth that is not required for your current project.
Otherwise, it will result in a heavy CPU overload by executing the same audio dma engine.
This can also cause ASIO to generate clicks and pops.
38