Setting In Applications; Windows Multimedia Setup; Mac Os X Audio Midi Setup; Cubase Le 6 - ESI Juli@ User Manual

ESI Juli@

6. Setting in Applications

This chapter contains basic configuration examples for some software applications. Please also refer
to the manual of the audio software you use for detailed information.

Windows Multimedia Setup

The Windows multimedia setup is required if you want to use your Juli@ as the main sound device
for Windows multimedia applications. Go to My computer-> Control panel -> Sounds and Audio
Device Properties -> Audio. Select the Juli@ entry as your playback device to make sure that all
standard signals are played via the Juli@ hardware.
Please note that some advanced properties buttons in this area will be grayed out because some of
the mixer features of Juli@ are not compatible with the functions provided by the Windows default
mixer that was designed for consumer audio hardware. However, this does not mean you do not
have any advanced options – the Juli@ control panel described in the previous chapter includes all
professional audio features that you might need and which are simply not always compatible with
the basic mixer control from Windows.

Mac OS X Audio MIDI Setup

The Audio MIDI Setup application can be found in the Utilities folder on your system. When you
launch it, you can setup Juli@ as your Default Input, Default Output or System Output device – if
required.
While audio production and editing applications usually provide an option inside their preferences
to select Juli@ as recording and playback device, many general standard applications such as
iTunes for example are usually accessing the Default Output device, selectable in the Audio MIDI
Setup dialog.
If you want to change settings of Juli@, you need to select it under Properties For. You can change
the default sample rate under Audio Input -> Format or Audio Output -> Format or you can change
the main playback volume under Audio Output -> Volume Slider -> M.

Cubase LE 6

Juli@ ships with a DVD-ROM with Cubase LE 6 from Steinberg. If you are using a different
recording software, you can skip this section.

Installation

To install Cubase LE 6, insert the DVD-ROM into the DVD-ROM drive of your computer. Under
Windows, the installation will normally start automatically – if not, you can launch it manually by
starting the installer from the DVD-ROM drive. To install Cubase LE 6 under Mac OS X, double
click on the installer icon
To proceed with the installation, follow all instructions on screen. During the installation the
Syncrosoft License Control software will be installed as well. To use Cubase LE 6 for more than 30
days, you need to activate it with this software via the internet. This means that you need an active
internet connection on the computer you are installing Cubase LE 6. We recommend you to activate
the software as early as possible.
25