Advertisement
Quick Links
English
Thank you for choosing KeyControl 49 - a cost effective MIDI keyboard for your home studio.
Connection / Power Supply / Controls
KeyControl 49 gets connected via the included USB cable to your computer. This connection powers the keyboard and is used to transfer
the MIDI data to your computer. In addition, the MIDI data is sent out via the MIDI output port that you can connect to other devices such
as a sound module. Just connect KeyControl 49, launch and configure your favorite audio software and start playing!
KeyControl 49 can also be used standalone when connected to an optional 9V DC power supply (not included). In this case the MIDI data
will only be sent out via the MIDI output port.
KeyControl 49 provides three buttons on the left side (
sensitive keys that can be used as additional control keys when in edit mode.
Octave Change
The keyboard range can be moved two octaves lower or higher using the
LED blinks when the octave range is moved down twice, it is on when the range is moved down once. The
octave range is moved up twice, it is on when the range is moved up once. Press the
default octave range (then both LEDs are on).
Quick Program Change
Edit
Press the
button. The LED will light up. Now you can step through the program numbers with the
Panic / Reset
Edit
Down
Up
Press
,
and
simultaneously to send MIDI note-off messages to every note on every channel to restore order to the system.
MIDI Channel
Edit
1. Press and hold the
button for 1.5 seconds to enter the edit mode. The LED will blink.
Ch.
Edit
2. Press the
key. The
3. Enter the MIDI channel value with the numeric keys (
Wheel Assignment
Edit
1. Press and hold the
button for 1.5 seconds to enter the edit mode. The LED will blink.
Wheel Assign
2. Press the
key. The
3. Enter the MIDI controller number with the numeric keys (e.g. 7 for MIDI volume) and confirm it with
Bank Select
Edit
1. Press and hold the
button for 1.5 seconds to enter the edit mode. The LED will blink.
LSB
2. Press the
key for a LSB Bank Select (#32) or the
3. Enter the desired bank number with the numeric keys and confirm it with
Numeric Program Change
Edit
1. Press and hold the
button for 1.5 seconds to enter the edit mode. The LED will blink.
PROG
2. Press the
key. The
3. Enter the program number with the numeric keys and confirm it with
Velocity Curve
Edit
1. Press and hold the
button for 1.5 seconds to enter the edit mode. The LED will blink.
Velocity Curve
2. Press the
0
1
3. Enter
or
with the numeric keys to select one of the two available velocity curves and confirm it with
Transpose
Edit
1. Press and hold the
button for 1.5 seconds to enter the edit mode. The LED will blink.
Transpose-
Transpose+
2. Press
or
Reset
Edit
1. Press and hold the
button for 1.5 seconds to enter the edit mode. The LED will blink.
Reset
2. Press the
key and then press
More Information
KeyControl 49 can be used standalone (with optional power supply), connected via USB to a PC running Windows XP or a Macintosh
running Mac OS X. If you want to use KeyControl 49 with Windows 2000 or Windows ME you need to download a special driver from the
www.esi-pro.com
ESI website (
support.
Edit
Down
and
LED will blink.
0-9
Edit
Down
and
LED will blink.
MSB
Edit
Down
and
LED will blink.
Edit
Down
key. The
and
LED will blink.
to transpose the keyboard by one half step down or up. You can reset to the default with
Enter
. KeyControl 49 will restore all values to factory defaults.
) where you can also find more information about KeyControl 49, our other products and about technical
Down
Up
Pitch Bend
,
,
), two wheels (
Down
and
Down
Enter
) and confirm it with
.
key for a MSB Bank Select (#0). The
Enter
.
Enter
.
Modulation
,
) and 49 full size velocity-
Up
Edit
buttons when the
LED is off. The
Up
Up
and
buttons simultaneously to reset to the
Down
Up
and
Enter
.
Edit
Down
and
Enter
.
Down
LED blinks when the
buttons.
LED will blink.
Transpose 0
.
Advertisement
