Dyson DC07 Owner's Manual page 13

18858_OPS_MANUAL_UPDATE_US.qxd
A
B
Shroud cleaning
(when necessary)
To remove any build-up of lint or
large dust particles on the shroud:
A Press the bin release catch to
remove the clear bin
B Clean the shroud with a cloth
or dry brush to remove the
lint and dust.
CAUTION
• Do not use the machine
without the clear bin
tip Clear bin will not come off
TM
cyclone unless the bin base
is open.
7/1/08 16:45 Page 13
C
D
To reassemble the clear bin
place on the floor with the clear
bin base closed.
TM
C Holding the carry handle, put
. the cyclone assembly inside the
TM
clear bin TM
and rear catches, and push
down to click the catches
into place.
D Ensure the clear bin
secure before replacing on
in place.
TM
the machine.
Clear bin
(optional)
,
TM
• You may rinse the clear bin
,line up the front
• Do not use detergents.
• Do not immerse any other
is
TM
• Ensure the clear bin
www.dyson.com
TM
cleaning
IMPORTANT
TM
with water. Rinse only the
clear bin – do not rinse the
TM
inner cyclone, shroud, or
cones.
part of the machine in water.
is
TM
completely dry before
replacing.
13