Advertisement
Method 1: Obtaining a Dynamic IP Address on Your Services Gateway
Use the port labeled 0/0 (interface ge-0/0/0) to connect to your Internet Service
Provider (ISP). Your ISP will assign an IP address using the DHCP process. If you
use this method, when you get to Task 6, skip Steps 1 through 4.
Method 2: Obtaining a Static IP Address on Your Services Gateway
Use the port labeled 0/0 (interface ge-0/0/0) to connect to your ISP. Your ISP will
have provided a static IP address. You will not receive an IP address using the
DHCP process. If you use this method, you must configure the static IP address on
the services gateway as described in Task 6, Steps 1 through 4.
Task 5: Access the J-Web Interface
1.
Launch a Web browser from the management device.
2.
Enter http://192.168.1.1 in the browser address box. The J-Web login page
appears.
3.
Specify the default username as root. Do not enter any value in the Password field.
4.
Click Log In. The first time you log in, the J-Web Initial Setup page appears.
5.
To begin configuring your services gateway, click the Start button in the lower right
corner of the page.
Task 6: Configure the Basic Settings
Configure the basic settings, such as hostname, domain name, and root password for
your services gateway.
IMPORTANT: Ensure that you have configured the IP address, root authentication,
and default gateway before you apply the configuration.
NOTE: All fields marked with an asterisk (*) are mandatory.
NOTE: All network and management access settings are optional.
If you have followed method 1 of Task 4 (Obtaining a Dynamic IP Address on Your
Services Gateway), you can skip all the other steps and go directly to Task 7.
If you have followed method 2 of Task 4 (Obtaining a Static IP Address on Your Services
Gateway), ensure that you make the following J-Web modifications:
1.
On the Configure System: Network Settings page of the wizard, enter the IP address
of the device that connects your device with WAN (service provider) in the Default
Gateway field, and enter server names in the DNS Name Servers list. Your ISP
provides the IP address for the gateway and the server names.
2.
On the Configure Interfaces page of the wizard, select the ge-0/0/0.0 interface and
click Edit.
3.
On the Add/Edit interface page, next to Address, clear DHCP and select IP
Address.
4.
In the IP Address/subnet field, enter the IP address provided by your ISP. The IP
address must be entered in a.b.c.d/xx format, where xx is the subnet prefix.
NOTE: To allow the required Inbound services and protocols to be terminated on the
Services Gateway, make sure you have selected the required services and protocols
under Services (Inbound) and Protocols (Inbound). Select all to permit all protocols
and services.
NOTE: You can use the Configure J-Web Preferences page of the wizard to set the
J-Web starting page options and J-Web commit options.
Task 7: Apply the Basic Configuration
On the last page (Review and Commit) of the wizard, review the basic configuration, and
click Commit to apply the configuration.
After you configure the basic settings, the J-Web Setup wizard redirects you to the
J-Web pages, where you can continue configuring the device.
Page 3
Advertisement
