Returning Your System To Its Factory Condition - Gateway TC73 Reference Manual

Returning your system to its factory
condition
In case your computer experiences problems that are
not recoverable by other methods, you may need to
reinstall everything to return your system to its factory
condition. You can reinstall using either your hard
drive or the recovery discs you have created.
then reinstalls Windows and all software and drivers that were
pre-installed on your system. If you can access important files on
your hard drive, back them up now.
•
•
•
Recovering from within Windows Vista
To reinstall Windows Vista and all pre-installed
software and drivers:
1
2
84
CHAPTER 7: Maintaining Your Notebook
Caution
This complete recovery deletes everything on your hard drive,
If you can still run Windows Vista, see
"Recovering from within Windows Vista" on
page 84.
If you cannot run Windows Vista and your
original hard drive is still working, see
"Recovering from the hard drive during startup"
on page 85.
If you cannot run Windows Vista and your
original hard drive has been completely
re-formatted or you have installed a replacement
hard drive, see
discs" on page
Click (Start), All Programs, Gateway, then click
Gateway Recovery Management.
Recovery Management
Click the Restore tab, then click Completely
Restore System to Factory Defaults. The
Restoration
dialog box opens.
"Recovering from your recovery
86.
opens.
Gateway
Confirm