Table of Contents
Advertisement
WISELiNK
Using the WISELINK Function
This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a USB Mass Storage Class
(MBC) device.
Press the POWER button on the remote control or front panel.
Connect a USB device containing JPEG and/or MP3 files to the WISELINK jack
(UBB jack) on the side of the TV.
If you enter the WISELINK mode with no USB device connected the message "There is no device connected' witl appear.
In this case_ insert the USB device_ exit the screen by pressing the WISE LINK button on the remote control and enter the
WISELINK screen again.
>-
Photo and audio files must be named in English, French or Spanish. If not, the files can not be played. Change the file
names to English, French,or Spanish if necessary,
>
The file system only supports FAT16/32 (The NTFB file system is not supported)
:_ Certain types of UBB devices may not be compatible with this TV.
Wiselink only supports the UBB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported,)
>
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data,
SAMSUNG is not responsible for any data file damage or data loss.
>"
Recommended image resolution for Wisetink is 6 mega pixels.
>
Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB
Compatibility problem.
Only MP3 and JPEG file formats are supported.
We recommend the sequential jpeg format. Progressive jpeg uses a lot of memory and decoding may fail.
:_
Do not disconnect the USB device while it is "loading."
:_
Neither PTP (Picture Transfer Protocol) nor MTP (Media Transfer Pprotocol) is supported.
The playing duration of an mp3 file may be displayed as '00:00:00' if its playing time information is not found
at the start of the file.
The higher the resolution of the image, the longer it takes to display on the screen.
>*
If the horizontal resolution of an image is higher than 5000, it cannot be decoded.
If the vertical resolution of an image is higher than 4000_ it cannot be decoded.
Using the Remote Control Button
in WISELINK
Menu
Button
Operations
C<2_)
Move the cursor and select an item
Setect the currently selected
item.
P_Y]_AUSE
G
Play or pause the Slide Show or MP3 file.
RETU_
Q
Return to the previous menu
O
Run various functions from the Photo and Music menus.
STOP
(_)
Stop the current slide show or MP3 file.
(_)
Page Up or Down (file list item)
B_r
Stop the current function and return to the previous high-level menu.
Advertisement
Table of Contents
Troubleshooting
