Summary of Contents for Samsung LN-T4669FX - 46" LCD TV
Page 1
Owner's instructions Register your product at www.samsung.com/global/register Record your Model and Serial number here for future reference. • Model • Serial No.
Page 2
United States for the warranty penoa originally specified and to the Original Purchaser onl_ The abe te aescnDea warranty repairs must be performed by a SAMSUNG Authorized Set ce Center. &.long with this Statement the Original Dmited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presemea to the Service Center. Transportation to and from tne Service Center is the reseonsibitity of the purchaser.
General information List of Features . Adjustable picture settings that can be stored in the TV's memory. . Automatic timer to turn the TV on and off. A specia! sleep timer. Excellent Digital Interface & Networking With a buitt-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver...
Viewing the Control Panel Buttons on the Lower-Riqhtht Part of the Panel The buttons on the lower-right panel control your TV's basic features, including the on-screen menu. To use the more advanced features, you must use the remote control. Front Panel buttons Touch the each button to operate.
Viewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously, such as VCR or DVD players. For more information on connecting equipment, see pages 6-11. [Side Panel Jacks] ÷÷ O AUDIO OUT COMPONENT IN 1,2 Connects to the audio input jacks on your Amplifier/...
Used to display Channel Lists on the screen. This remote call be used to control ®@@ I_ ANTENNA recording on Samsung DVD recorders Press to select 'AIR" or 'CABLE". with the Anynet feature. (Refer to page 79) VCR/BVD Functions - Rewind CH®...
Installing Batteries in the Remote Control Lift the cover at the back of the remote control upward as shown in the figure..4, install two AAA size batteries. "---7"/_=_ >-Make sure to match the %" and "-" ends of the batteries with the diagram inside the compartment, Replacethe cover, >_ Remove the batteries and store them in a coot, dry place if you won't be using the remote control for a long time.
Connecting Cable TV To connect to a cable TV system, follow the instructions below. Cable without a Cable Box Plug the incomingcable into the ANT 2 IN (CABLE) terminal on the back of the TV. Because thisTV is cable-ready, you donotneeda cableboxtoviewunscrambled c ablechannels. Connectinqto a Cable Box that Descrambles All Channels...
Connecting a DVD Player or Cable Bo×/Satellite receiver (Set-Top Box) via HDMI This connection can only be made if there is an HDMI Output connector on the external device. Connect an HDMt Cable Side Panel Jacks between the HDMI tN OVDPlayeror Cable Box/Satellite receiver...
Connecting a DVDPlayerorCableBox/Satellite r eceiver ( Set-Top Box) viaComponentcables The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV. Connect a Component TV Rear Panel Cable between the COMPONENT IN (t or 2) [Y, PB, PR]jacks on the TV and the COMPONENT...
S-Video Connection Your Samsung TV can be connected to an S-Video jack of a VCR. (This connection delivers a better picture when compared to the regular Video connection above.) To begin, follow steps 1-3...
Connecting a Digital Audio System The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV. Connect an Optical Cable Digital Audio System between the "DIGITAL AUDIO OUT (OPTICAL)" jacks on the TV and the Digital Audio Input jacks on the Digital Audio System.
Operation Turning the TV On and Off Press the POWER(b button on the remote control. SOURCE You can also use the POWERO button on the TV. POWER Plug & Play Feature When the TV is initially powered on, basic settings proceed automatically and subsequently: Press the POWER button on the remote controI.
7. Press the A. o r_'button toselect "On" or "Off", then p ress the ENTER button. The m essage "Select the time z one inwhich you live." isdisplayed. Press the AorT button tohighlight the time z one for y our local area Press the ENTER button.
Usinqthe PRE-CH Button to select the Previous Channel Press the PRE-CH button. The TV will switch to the last channel viewed. >-To quickly switch between two channels that are far apart, tune to one channel, then use the number button to select the second channel. Then use the PRE-CH button to quickly alternate between them.
Viewing the Menus With the power on, press the MENU button. The main menu appears on the screen. The menu' s left side has five icons: Picture, Sound, Channel, Setup, input. Use the _t,or V' button to select one of the five icons. Then press the ENTER button to access the icon's sub-menu.
Page 18
Storing Channels in Memor_L_Automatic MethodJ Press the MENU button to display the menu. Press the A or • button to seJect "Channel', then press the ENTER button. Press the A or T button to select "Auto Program", then press the ENTER button. Press the A or T button to select the antenna connection, then press the ENTER button.
Setting Up Your Remote Control After the television has been set up properly, your remote control can operate in five different modes: TV, DVD, Cable, Set-Top Box, VCR. Pressing the corresponding button on the remote control allows you to switch between these modes and control whichever piece of equipment you choose.
Page 20
Setting Up the Remote to Operate Your DVD 1. Turn off your DVD Press the DVD button on your TV's remote control. Press the SET button on your TV's remote control. Using the number buttons on your remote control, enter three digits of the DVD code listed on page 20~21 of this manual for your brand of DVD Make sure you enter three digits of the code, even if the first digit is a "0".
To Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/ Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your choice. Press the MENU button to display the menu. Press theA or _' button to select "lnput"_then press the ENTER button.
Picture Control Using Automatic Picture Settings Your TV has Three automatic picture settings ("Dynamic", "Standard" and "Movie") that are preset at the factory. You can activate either Dynamic_ Standard, Movie by making a selection from the menu. Press the MENU button to display the menu. Press the ENTER button_to select "Picture".
Adjusting the Color Tone You can change the color of the entire screen according to your preference. Press the MENU button to display the menu. Press the ENTER button to select "Picture". Press the A or T button to select "Color Tone"_then press the ENTER button. Press the A or T button to select "Cool2", "Cooll"_ "Normal"_ "Warm1"...
Adjusting the Detailed Settings Samsung's new TVs allow you to make even more precise picture settings than previous models. See below to adjust detaited picture settings. Activatinu Detailed Settings Press the MENU button to display the menu. Press the ENTER button to select "Picture".
Page 28
Activating Gamma You can adjust the Primary Color (Red, Green Blue) Intensity. (-3 ~ +3) Press the A or _' button to select "Gamma", then press the ENTER button. Press the 4 or _,- button to decrease or increase the value of a particular item. Press the ENTER button.
Page 29
Activating Mv Color Control This setting can be adjusted to suit your personal preferences. When using the My Color Control Feature, the current picture remains in movement. t S. Press the ENTER button to select "My Color Control". t 6. Press the A or T button to select "Pink", "Green", "Blue", "White" or "Reset". Press the ENTER button.
Changing the Screen Size Occasionally,you may want to changethe size of the imageon your screen. YourTV comes withsix screen size options,each designed to work best with specifictypesof video input. Your cable box or satellitereceiver may have its own set of screen sizes as welt.In general, though,you shouldview theTV in 16:9 modeas much as possible.
Setting the Active Color If you turn on this option, the blue and green colors witl be more vivid. Press the MENU button to display the menu. Press the ENTER button, to select "Picture". Press the h, or T button to select "Active Color", then press the ENTER button. Press the A or T button to select "Off"...
Setting the HDMI Black Level You can select the black level on the screen to adjust the screen depth. Press the MENU button to display the menu. Press the h, or T button to select "Setup", then press the ENTER button. Press the A or _' button to select "HDMI Black Level_ then press the ENTER button.
Viewing Picture-in-Picture This product has one built-in tuner, which does not allow PIP to function in the same mode. For example, you cannot watch one TV channel in the main screen and a different one in the PIP screen, Please see 'PIP Settings' below for details. You can use the PIP feature to simultaneously watch two video sources.
Chanqinq the Position of the PIP Window Press the A or T button to select "Position", then press the ENTER button. Press the A or • button to select the required option_then press the ENTER button. In Double Window ( [11 ), and Double Wide ( r"T=l) modes_ "Position" cannot be selected.
Sound Control Customizing the Sound The sound settings can be adjusted to suit your personal preference. (Alternatively, you can use one of the "automatic" settings.) Press the MENU button to display the menu. Press the A or T button to select "Sound", then press the ENTER button. Press the A or T button to select "Equalizer"_ then press the ENTER button.
Setting the TruSurround XT TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichanne{ content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system_ including internal television speakers. It is fully compatible with all multichannel formats. Press the MENU button to display the menu.
Choosing a Multi-Channel Sound (IVlTS)track -Analog Multi=Track Sound Press the MENU button to display the menu. Press the ,_ or T button to select "Sound", then press the ENTER button. Press the A or _' button to select "Multi-Track Options", then press the ENTER button.
Selecting the Internal Mute Sound output from tile TV speakers is muted. Press the MENU button to display the menu. Press the A or T button to select "Sound", then press the ENTER button. Press the A or _' buttonto select "Internal Mute"_then press the ENTER button. "on", Press the A or T button to select then press the ENTER button.
Listening to the Sound of the Sub (PIP) Picture When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. Press the MENU button to display the menu. Press the A or T button to select "Sound", then press the ENTER button. Press the A or T buttonto select "Sound Setect'_then press the ENTER button.
Channel Control Selecting the Antenna Press the MENU button to display the menu. Press the A or T button to select "Channel", then press the ENTER button. Press the ENTER button to select "Antenna". Press the A or V' button to select "Air" or "Cable", then press the ENTER button.
Adding and Erasing Channels You can add or delete a channel to display the channels you want. To use the Channel List function, first run "Auto Program". Press the MENU button to display the menu. Press the A or T button to select "Channel"_ then press the ENTER button. Press the ,t.
To Set-Up Your Favorite Channels You can set channels you watch frequently as favorites. Press the MENU button to display the menu. Press the A or _' button to select "Channel"_ then press the ENTER button. Press the A or T button to select "Channel List", then press the ENTER button Press the A or T button to select "All"...
Using the Channel Lists Displays the channel list automatically when you press CH LIST button on the remote. (Choose AIL Added or Favorite) Press the MENU button to display the menu. Press the A or _' button to select "Channel"_ then press the ENTER button. Press the A or _' button to select "Channel List", then press the ENTER button.
Labeling Channels Channels can be labeled so that their call letters appear whenever the channel is selected. Press the MENU button to display the menu. Press the A or 'V button to select "Channel", then press the ENTER button. Press the A or T button to select "Name", then press the ENTER button, Press the _, or _' button to select the channel to be assigned a new name_ then press the ENTER button.
Fine Tuning Analog Channels Use fine tuning to manually adjust a particular channel for optimal reception. Press the MENU button to display the menu. Press the A or V button to select "Channel", then press the ENTER button. Press the A or _' button to select "Fine Tune", then press the ENTER button. Press the _ or _ button to adjust the fine tuning.
Windows and your particular video card. However, even if your actual screens look different, the same basic set-up information wilt apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.) First, click on "Control Panel"...
Page 47
Setting up the TV with your PC How to Auto Adjust Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. >- This function does not work in DVI-Digitat mode.
Chan_ Screen Position Press the MENU button to display the menu. Press the A or V button to select "Setup", then press the ENTER button. Press the A or V button to select "PC", then press the ENTER button, Changeto the PC modefirst. Press the A or _' button to select "Position", then press the ENTER button.
Time Setting Setting the Clock Setting the clock is necessary in order to use the various timer features of the TV. Also, you can check the time while watching the TV. (Just press the INFO button.) _Option 1: Setting the Clock Manually Press the MENU button to display the menu.
Page 50
Option 2: Settin_ the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. Press the MENU button to display the menu. Press the A or _r button to select "Setup", then press the ENTER button. Press the A or T button to select "Time", then press the ENTER button.
Page 51
Settin_ Timer The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, I50 and 180 minutes). Press the MENU button to display the menu. Press the A or V button to select "Setup", then press the ENTER button. Press the A or T button to select "Time", then press the ENTER button.
Page 52
Settincl the On/Off Timer Press the MENU button to display the menu. Press the A. or _r button to select "Setup", then press the ENTER button. Press the A or _r button to select "Time", then press the ENTER button. Press the A.
Setting the Blue Screen Mode If no signal is being received or the signal is very weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the poor picture, you must set the "Blue Screen" mode to "Off' Press the MENU button to display the menu.
Viewing Closed Captions (On-Screen Text Messages) =Analog The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER button.
Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER button. Press the A or T button to select "Caption'_ then press the ENTER button. Press the ENTER button to select "Caption'.
Menu Transparency Level Adjusts the transparency of the menu screen. Press the MENU button to display the menu. Press the A or _r button to select "Setup"_ then press the ENTER button. Press the A or _r button to select "Menu Transparency",then press the ENTER button.
Setting the Function Help Displays help on the menu functions. Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER button. Press the A or _r button to select "Function Help", then press the ENTER button. Press the A or T button to select "On'_ then press the ENTER button.
Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. When the V-chip feature is activated, the PIP features do not function. U.S.A Only This product is covered by the following U.S.patents :US4,930,158,US4,930,160 SettinqUpU Your Personal...
Page 59
to _:nable/Disable the V-Chip Press the MENU button to display the menu. Press the A or T button to select "Setup"_ then press the ENTER button. Press the A or T button to select "V-Chip", then press the ENTER button. The message "Enter PIN"...
Page 60
3, The " V-Chip" screen will appear. Press the Aor_'button toselect "TV Parental Guidelines", then p ress the ENTER button. 4, The " TV Parental Guidelines" screen will appear. Press the Aor'_' b utton toselect one ofthe six aged based categories: t TV-YT: Children 7 and over •...
Page 61
Howto Setu_o Restrictions Usinqthe MPAA Ratin s: G PG PG-13 R NC-17 X NR The MPAA rating system uses the Motion Picture Association of America (MPAA) system and its main application is for movies. When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA or TV-Ratings).
Page 62
How to Set ujo Restrictions Usin_ the 'Canadian Enqlish' Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER button. Press the A or T button to select "V-Chip", then press the ENTER button. The message "Enter PIN"...
Page 63
How to Set ujo Restrictions Usinq the 'Canadian French' Press the MENU button to display the menu. Press the A or T button to select "Setup", then press the ENTER button. Press the A or T button to select "V-Chip", then press the ENTER button. The message "Enter PIN"...
Page 64
Usin the V-Chi for Di_ channels Parental restriction information can be used while watching DTV channels. Press the MENU button to display the menu. Press the & or T button to select "Setup"_ then press the ENTER button. Press the A or _' button to select "V-Chip", then press the ENTER button. The message "Enter PIN"...
Upgrading the Software Samsung may offer upgrades for TV's firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about downloading upgrades and using a USB drive. Upgrades wilt be possible by connecting a USB drive to the USB port located on located on the side of your TV.
> Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data, SAMSUNG is not responsible for any data file damage or data loss. >" Recommended image resolution for Wisetink is 6 mega pixels.
Using the WiSELiNK Menu Press the MENU button. Press the A or 'I' button to select "input", then press the ENTER button. Press the A or _r button to select "WISELtNK", then press the ENTER button. Press the A or T button to select the corresponding USB Memory Device_ then press the ENTER button.
Using the PHOTO (JPEG) List This menu shows JPEG files and folders saved on an USB memory device. Complete Steps 1 to 3 of "Using the WISELINK Menu". (Refer to page 65) Press the 4 or _,- button to move to "Photo", then press the ENTER button. The saved file information is displayed as a folder or file.
Page 69
Selectino_a Photo and Slide Show Complete Steps 1 to 3 of "Using the WISELINK Menu". (Refer to page 65) Press the 4 or _,- button to move to "PhotC, then press the ENTER button. The saved file information is displayed as a folder or file. Press the INFO button to display "Start Slide Show"...
Page 70
_the Menu durinq a Slide Show Slide Show Speed: Select to control the slide show speed. You can select "Stow", "Norm" or "Fast". Background Music: Setect to choose whether you want to play an MP3 file during a slide show. You can select Music "ON"...
Page 71
Slideshow function information icon_ ed at the to left of the screen_, Icon Current OSD Function (Photo) SIideShow Photo SlideShow is in progress. You are able to pause a SlideShow and Music by pressing the PLAY/PAUSE button on the remote control during a SlideShow.
Page 72
Rotating. Complete Steps 1 to 3 of "Using the WISELINK Menu". (Refer to page 65) Press the 4 or _,- button to move to "Photo", then press the ENTER button. The saved file information is displayed as a folder or file. Press the A, T, 4 and t,, buttons to select a file, then press the ENTER button.
Page 73
Zoomina-in Complete Steps 1 to 3 of "Using the WISELINK Menu". (Refer to page 65) Press the 4 or I,_ button to move to "PhotC, then press the ENTER button. The saved file information is displayed as a folder or file. Press the A, T 4 and _ buttons to select a file, then press the ENTER button.
Page 74
Zoom function information icon _ ed at the to left of the screen}.. Icon Current OSD Function Zoom (x 2) Zoom-in to a photo x2. Zoom (x 4) Zoom-in to a photo x4. Zoom (x 1) Restore a photo to its original size. Pan Down Pan down to view the lower part of a zoomed-in photo.
Using the IVlP3List This menu shows MP3 files from among the files saved on a USB memory device. Complete Steps 1 to 3 of "Using the WISELINK Menu". (Refer to page 65) Press the 4 or 1_ button to move to "Music", then press the ENTER button. The saved file information is displayed as a folder or file.
Page 76
Music Repeat Complete Steps 1 to 3 of "Using the WtSELINK Menu". (Refer to page 65) Press the 4 or _,- button to move to "Music", then press the ENTER button. The saved file information is displayed as a folder or file. Press the A or T button to select a file, then press the ENTER button.
Using the Setup Menu Setup displays the user settings of the WISELINK menu. Complete Steps 1 to 3 of "Using the WtSELINK Menu". (Refer to page 65) Press the 4 or _,- button to move to "Setup"_then press the ENTER button. Press the A or T button to select an item you wanL then press the ENTER button.
Page 78
Slide Show Speed: Select to control the slide show speed. You can select "Fast"_ "Normal" or "Stow". Baekqround Music : Select to determine whether to play an MP3 file during a slide show. You can select Music "On" or Music "Off". Baekqround Music Settinct:.
Samsung TV's remote. Connecting Anynet + Devices The Anynet + system can be used only with Samsung devices that have the Anynet + feature. To be sure your Samsung device has this feature, check if there is an Anynet+ logo on it.
Setting Up Anynet + The following settings help set the Anynet + functions. To use theAn net + Function net + HDMI-CEC} must be set to On Press the Anynet + button. Press the A or _' button to select "Setup", then press the ENTER button. Press the ENTER button to select "Anynet + (HDMI-CEC)", then press the ENTER button.
Anynet + Menu The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV. Anynet + Menu Description View TV Switches from Anynet + to TV broadcast mode. Record Starts a recording. (This menu works only for a device supporting recording.) (Device_Name) Menu Shows the menu of the connected device.
Listening through a Receiver (Home theater) You can listen to sound through a receiver instead of the TV speaker. Press the Anynet + button. Press the A or T button to select "Receiver"_then press the ENTER button. Press the ._1 or 1_ button to select to "On", then press the ENTER button. Now you can listen to sound through the receiver.
Appendix Troubleshooting If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply, call your nearest Samsung service center. Problem Possible Solution Poor aicture Try another channel.
Page 84
Problem Possible Solution Horizontal bars appear toflicker, Adjust the Coarse tuning and then a djust the Fine t uning. jitter or shimmer on the image. Vertical bars appear toflicker, Adjust the Coarse tuning and then a djust the Fine t uning. jitter or shimmer on the image.
Installing the Stand <2> <3> t, Place the TV face down on a soft cloth or cushion on a table. 2, Put the stand into the hole at the bottom of the TV. 3, Insert screw into the hole indicated and tighten. Disconnecting the Stand <2>...
Auto Wall-Mount Adjustment (Sold separately) Once the auto wall mount is installed, your TV's position can be easily adjusted. Auto Wall-Mount TV Rear Panel EX-UNK Cable (Not supplied) Enterinq the menu 1. Press the A T, 4 or I_ button on your remote control. The Walt Mount Adjustment screen is displayed.
Do not use fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents > Samsung is not liable for product damage or personal injury when a non-VESA or non-specified walt mount is used or the consumer fails to follow the product installation instructions.
Using the Anti-Theft Kensington Lock (depending on the model) The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. The appearance and locking method may differ from the illustration depending on the manufacturer.
Specifications LN-T4069F LN-T4669F Model Name 40 inches 46 inches Screen Size {Diagonal) 1920 x 1080 @ 60 HZ 1920 x 1080 @ 60 PC Resolution Sound 1OW X2 10WX2 Outz Jt DimenMon$ (WxOxH) 44.6 X 41 X 28.2 inches 39,4 X 34 X 250 inches Body (1133.8 x 104.0 x 715.2 mm) (9998...