Settings; Highway/City Mode; Muting An Alert; Auto Mute Mode - Cobra ESD 7570 Operating Instructions Manual

Settings

Your Detector
Settings
When changing the Settings on your detector, please keep in mind:
Each time the unit is turned On the factory settings of Highway and
n
Auto Mute-On will be set. They can be changed while the unit is in use
as described in the following sections.

Highway/City Mode

Setting your detector to City mode delays all X band audio alerts at lower
signal strength levels. (A single beep will sound when the signal is first
detected.) This will reduce false alerts while you are driving in, or near,
urban areas where there are many sources for conflicting X band signals
such as microwave towers and automatic door openers.
To change settings, follow the procedure listed below, which indicates what you will
see and hear as you complete each step. The factory setting is Highway mode.
Highway Mode
City Button
X/K Ka L V/S
Press and
release
City Mode
X/K Ka L V/S
C
To Change From Highway Mode To City Mode
Press and release Audio
the City button.
One beep
To Change From City Mode To Highway Mode
Press and release Audio
the City button
Two beeps
again.
6 English
•
Visual Display
C LED Lights
Visual Display
Audio Only
Settings
Your Detector

Muting an Alert

Your detector allows you to quickly turn Off an audio Alert by momentarily pressing
the Mute button. If you press the Mute button a second time during
the Alert, the audio Alert will be turned back On.

Auto Mute Mode

Auto Mute will automatically reduce the audio volume of all alerts after four
seconds for as long as the signal is detected. The factory setting for Auto Mute
is On.
To Turn Auto Mute Off
Press and release Audio
the Mute button
One beep
while no alert
is occurring.
To Turn Auto Mute On
Press and release Audio
the Mute button
Two beeps
again while no
alert is occurring.
Mute Button
Press and
release
Visual Display
Audio Only
Visual Display
Audio Only
Nothing Comes Close to a Cobra 7
®