Binatone Caprice 670 Manual page 26

Remote operation continue...
Using the
remote
instruction
code
Switching
ON from
a remote
location
1 Using a tone dialing phone, dial your home phone number.
2 When you hear a 'beep', key in your REMOTE ACCESS code.
3 Press keypad "9" to switch ON.
Interrupt and bypass the
outgoing message (OGM)
Pause and restart during
message playback
Skip forward to next
message
Repeat the current
message
Skip back to the
1
previous message
Stop playback or
recording
Binatone Help Line - 0845 345 9677
To repeat message , press "1"
To skip back to the previous message , press
"1" twice
To skip message, press "3"
To play announcement, press "4"
To record greeting, press "5"
To stop function, press "6"
To delete message, press "7"
To set Answer OFF, press "8"
To set Answer ON, press "9"
After setting to Answer ON, press "9" to
between OGM1 and OGM2,
To delete all messages, press "0" twice quickly.
(There could be a delay while the delete is being
done, before you hear a beep and the menu list again.)
To disconnect the call, press "#"
If the answering machine is switched off, it will
answer your call after 15 rings allowing you
to switch the machine ON from a remote location;
currently being played back
Voice prompt: "Message erased"
Delete all messages that
2
have been played back
ABC
Voice prompt: "Message erased"
Play the outgoing message
3
(OGM1 or OGM2)
DEF
Record a new outgoing
1
message (OGM1 or OGM2)
Switch the machine on
1
Switch between OGM1
and OGM2
Switch the machine off
6
MNO
Voice prompt: "Answering is off "
Calls are charged at Local Call rate.
26
switch
7
PQRS
0 0
4
GHI
5
JKL
9
WXYZ
8
TUV