Asus P5GPL-X Manual page 75

The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the
first try. Turning an external modem off and then back on while the
computer is off causes an initialization string that turns the system
power on.
Resume On By PCI/PCIEX Devices [Disabled] Resume On By PCI/PCIEX Devices [Disabled]
Resume On By PCI/PCIEX Devices [Disabled] Resume On By PCI/PCIEX Devices [Disabled] Resume On By PCI/PCIEX Devices [Disabled]
When set to [Enabled], this parameter allows you to turn on the system
through a PME# device. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled] Power On By PS/2 Keyboard [Disabled]
Allows you to use specific keys on the keyboard to turn on the system.
This feature requires an ATX power supply that provides at least 1A on the
+5VSB lead. Configuration options: [Disabled] [Enabled]
Wakeup Password Wakeup Password Wakeup Password Wakeup Password Wakeup Password
This item appears only when the Power On By PS/2 Keyboard is set to
Enabled. Select this item to set or change the keyboard wakeup password.
The K e y b o a r d W a k e u p P a s s w o r d K e y b o a r d W a k e u p P a s s w o r d K e y b o a r d W a k e u p P a s s w o r d K e y b o a r d W a k e u p P a s s w o r d K e y b o a r d W a k e u p P a s s w o r d item that appears below shows the
default N o t I n s t a l l e d N o t I n s t a l l e d N o t I n s t a l l e d N o t I n s t a l l e d N o t I n s t a l l e d. After you have set a password, this item shows
I n s t a l l e d I n s t a l l e d. I n s t a l l e d
I n s t a l l e d I n s t a l l e d
Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled] Power On By PS/2 Mouse [Disabled]
When set to [Enabled], this parameter allows you to use the PS/2 mouse
to turn on the system. This feature requires an ATX power supply that
provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
A S U S P 5 G P L - X A S U S P 5 G P L - X A S U S P 5 G P L - X A S U S P 5 G P L - X A S U S P 5 G P L - X 2 - 2 9 2 - 2 9 2 - 2 9 2 - 2 9 2 - 2 9