Two-Step Presser Foot Lever; Adjusting The Presser Foot Pressure - Euro-Pro 380 Instruction Manual

Two-step presser foot lever / Palanca alza-prensatelas con dos escalones
When sewing several layers of thick fabric, the presser foot can be
raised to a second higher level to facilitate the placement of the fabric
"A". (See fig. 1)
Para coser ropas extremamente gruesas se puede ensanchar el pasaje
de la ropa del pie subiendo la palanca del alza-prensatelas de un escalón
"A". (Mirar figura 1.)
Adjusting the presser foot pressure / Adjuste de la presion del pie prensatia
Open the face cover to readjust the presser foot
pressure regulator.
1. Move the lever up or down for the desired
pressure. For light fabrics set lever at 1, set at 2 for
medium fabrics and 3 for heavy fabrics. (See fig. 2.)
2. Insufficient pressure may cause poor feeding,
skipped stitches or difficulty in guiding the fabric.
3. When darning or sewing freehand embroidery,
release the pressure by setting the lever on "0".
(See fig. 3.)
La presiõn del pie prensatela de la máquina ha sido
preseleccionada y no requiere especiales ajustes de
acuerdo con el tipo de tejido (liviano o pesdo). (Mirar
figura 2 & 3)
Fig. 1
Fig. 2
Fig. 3
13