Installation; Windows Xp - ESI DuaFire User Manual

DuaFire ESI

3. Installation

Before installing the drivers of DuaFire, we recommend to check on the download section of
www.esi-audio.com for updated drivers.

3.1 Windows XP

Switch off DuaFire via the power switch on the rear panel before you install the driver (put the
switch in the middle position). Then launch setup.exe from the Windows XP folder of the included
driver CD or from a download of a recent driver from our website. Make sure the driver you are
about to install is intended for Windows XP.
You will now see a dialog as shown on the left picture below. Click Next. You can define the target
directory for the installation now. Confirm it with Next.
The installer now informs you that the driver installation will start as shown on the left picture
below. Confirm this with Next. During the following process you will see a dialog box once or
several times that informs you that the driver software has not passed Windows Logo testing. Please
be assured that our drivers have been tested in various different ways and are OK to be used.
Confirm any such dialog with Continue Anyway.
7